Skip to content
Back to the 2D Library
Alarm Clock, Side View, line drawing CAD block (Objects)

Alarm Clock, Side View

A twin-bell alarm clock in side profile. The case is a tall narrow slab with a stepped back panel on the left, thin lines marking the rim, and one bell visible on top with its mounting bolt and a long hammer rod pointing straight up. A single round-tipped foot sticks out below. Seen like this, the clock shows its real thickness and how far the bell and hammer rise above the case. Use it in shelf and nightstand sections, in elevation sheets that show a clock in three views, or in packaging drawings. Together with the front and top views it makes a compact set. A picture of your own vintage clock can be turned into a block the same way.

Free, like every block in the Library.

Found it useful? Support the Library

Details

Category
Objects
Approximate size
16 cm tall × 5 cm wide
View
Side
Formats
PNG, SVG, DXF
Group
other

About 16 cm high and 5 cm deep in side view. Approximate; rescale to your own clock.

Files and formats

PNG
Image for printing and presentations.
SVG
Vector drawing for vector software and laser cutting.
DXF
AutoCAD 2018 format (DXF R2018). Curves are splines. Layers: Inner (line detail), plus Outer and Fill when the block has a solid outline.
ZIP (all)
PNG, SVG and DXF together with the licence.

Frequently asked questions

Around 5 cm for the case, plus a little more for the bell. Check your own clock and leave a few millimetres of gap.
Yes. Insert the front, side and top blocks at the same scale and line them up as in a technical drawing, with projection lines between them.
It is a long thin rod at the top. If you do not want it, explode the block and erase that line.